Pure sine wave inverter

PI2000B3R

A 2000 W pure sine wave inverter with a metal enclosure.

Continuous output power
2000 W (resistive load)
Nominal AC output voltage
120 VAC ±10%
Utility-priority automatic transfer
Not supported
  • Pure sine wave AC output
  • High-output AC terminal block and USB-A port
  • Wired LCD remote control
  • Ground-fault, short-circuit and overtemperature protection
  • Inverter output without automatic AC transfer

Technical specifications

PI2000B3R specifications
Output waveformPure sine wave
Continuous output power2000 W (resistive load)
Surge output power4000 W
Nominal DC input voltage12.8 - 13.2 VDC
Operating input voltage10.0 - 16.0 VDC
Nominal AC output voltage120 VAC ±10%
Output frequency60 ± 3 Hz
Maximum inverter efficiency90%
Full-load inverter efficiency87%
Typical no-load current1.4 ADC
Nominal AC input voltage—
Input overvoltage shutdown16.0 ± 0.5 VDC
Input undervoltage alarm10.5 ± 0.5 VDC
Input low-voltage shutdown10.0 ± 0.5 VDC
Output overload shutdown threshold2400 ± 400 W
Input fuses40 A × 8
Ground-fault protection (GFCI)Supported
Output short-circuit protectionSupported
Overtemperature protectionSupported
AC output sockets2
High-output AC terminal block1
AC input terminal blockNone
Utility-priority automatic transferNot supported
USB portUSB-A × 1
USB output5 V / 2.1 A
Control switchON / OFF / REM
Wired remote controlLCD
Status indicatorsPower, fault and GFCI
Housing materialMetal
Length≈359.9 mm
Width≈230.1 mm
Height≈95.5 mm
Unit weight≈4.21 kg
Remote displayInput voltage, output power and fault status

PI Series Datasheet

Datasheet · R4 · English · PDF 1.0 MB

View PDF