Marine inverter/charger

PRO3000M

A 3000 W pure sine wave inverter/charger with NMEA 2000 integration for marine electrical systems.

Continuous output at 40°C
3000 W (resistive load); output derates above 40°C
Maximum charge current at 14.4 V
150 A; derates above 14.4 V and may be reduced by ambient temperature
Network interface
NMEA 2000

Models in this series

  • Pure sine wave inverter and AC battery charger
  • Three-stage charging: Bulk, Absorption and Float
  • Automatic AC transfer and Power Share control
  • NMEA 2000 communication

Technical specifications

PRO3000M specifications
Nominal DC input12 VDC
DC operating rangeLBCO setting to 18.0 VDC
Continuous output at 40°C3000 W (resistive load); output derates above 40°C
Surge output / duration6000 W / 5 s
AC output voltage120 / 110 / 108 VAC; power reduced to 85% at 110 or 108 VAC
Continuous AC current at 120 VAC25 A
Output waveformPure sine wave
Selectable frequency60 / 50 Hz
DC current at full load304 A
Peak / full-load efficiency91% / ≥84%
Transfer relay rating50 A
Continuous pass-through current40 A
AC undervoltage setting85-110 VAC; default 90 V
Transfer modesAppliance / UPS
Line-to-battery transfer settingAPL: 20 ms / UPS: 10 ms; do not connect motor loads in UPS mode
Inverter-to-shore transfer time<20 ms; 20 s delay
Nominal battery voltage12 VDC
Maximum charge current at 14.4 V150 A; derates above 14.4 V and may be reduced by ambient temperature
Adjustable charge current5-150 A; 5 A steps
Custom absorption voltage12.0-18.0 V; 0.1 V steps
Custom float voltage12.0-18.0 V; 0.1 V steps
Minimum battery voltage for charging0 VDC; lithium-ion requires a certified/listed BMS and manufacturer-specified Custom settings
AC input range during charging85-140 VAC
AC charging input frequency50 / 60 Hz
Maximum AC charging input current24 Arms
Power factor at full charge>0.98
Battery profilesFlooded, AGM, Gel and Custom; lithium-ion requires a certified/listed BMS and manufacturer-specified Custom settings
Charge managementThree-stage charging: Bulk, Absorption, Float. Power Share prioritizes AC loads by reducing charge current.
Temperature compensationOptional compatible battery temperature sensor (BTS).
EqualizationFlooded batteries only, when permitted by the battery manufacturer.
Protective shutdownLow battery, overload, short circuit and over-temperature; recovery depends on settings.
Network interfaceNMEA 2000
Remote controlOptional compatible remote panel through the RJ12 Remote port.
GFCI configurationCustomer-provided compatible GFCI protection.
Operating ambient temperature-20 to +60°C; output derates above +40°C; battery manufacturer's temperature limits also apply
Storage temperature-40 to +70°C
Operating / storage humidity5-95% RH, non-condensing
CoolingFan controlled by internal temperature or AC output power
Net weight8.4 kg
Overall L × W × H, including flanges415.3 × 305.2 × 125.4 mm
Outer carton dimensions (L × W × H)473 × 388 × 216 mm

PRO Series Datasheet

Datasheet · R14 · English · PDF 0.5 MB

View PDF