PT2460 Datasheet
Datasheet · R2 · English · PDF 0.4 MB
PT2460 - View 1MPPT solar charge controller
A 60 A MPPT solar charge controller for 12 V or 24 V battery systems, with LCD monitoring and system communication.
| Rated charging current | 60 A |
|---|---|
| Battery system voltage | 12 / 24 V |
| Battery operating voltage range | 8–32 V |
| Maximum PV power (12 V system) | 800 W |
| Maximum PV power (24 V system) | 1600 W |
| Maximum PV open-circuit voltage | 150 V |
| Maximum PV input current | 53 A |
| MPPT operating voltage range | Battery voltage + 2 V to 110 V |
| MPPT tracking efficiency | >99% |
| Charging conversion efficiency | 85–98% (10–100% of rated power) |
| Rated load current | 40 A |
| Static current consumption | ≤50 mA |
| Grounding type | Common negative; negative grounding |
| Operating ambient temperature | −35 to 65°C; no derating up to 45°C when well ventilated |
| Cooling method | Natural cooling |
| Ingress protection | IP32 |
| Overall dimensions (L × W × H) | 260 × 216 × 98.5 mm |
| Net weight | 3.4 kg |
| CAN communication protocol | RV-C |
| RS485 communication | Two isolated ports; Modbus; parallel communication supported |
| RS485 port auxiliary power | 5 V / 200 mA |
| Bluetooth communication | Built-in |
| Historical data storage | Previous 300 days |
| Display backlight | Activates on key press; switches off after 20 seconds without key activity |
| Battery types | Sealed lead-acid, gel, flooded lead-acid, lithium and user-defined |
| Charging current setting | 0–60 A; 0 disables charging |
| Parallel charging | Supported |
| Charging voltage drop compensation | Remote battery-voltage sensing supported |
| Lead-acid temperature compensation | Supported; requires an external battery temperature sensor |
| Load operating modes | Light control, light and timer control, manual (default), debugging and always on |
| Load pre-start | 1–6 seconds; default 2 seconds |
| Input and device protection | PV overvoltage, PV short circuit, nighttime reverse-current protection, input power limiting and device overtemperature. |
| Battery and load protection | Battery overtemperature (requires an external battery temperature sensor), load short circuit and overload, battery overvoltage and over-discharge protection. |
Datasheet · R2 · English · PDF 0.4 MB